- Out of stock
Microwave kiln can be used for microwave sintering of CERAMBOT ceramic printing. External dimensions of microwave kiln: φ195mm * H 170mm Internal dimensions of microwave kiln: φ130mm * H 90mm - Out of stock
The CERAMBOT core unit comes with four aperture needles, one for each aperture. Pink: 0.6mm. Gray: 1.2mm. Light green: 1.6mm. Light blue: 2.2mm. - Out of stock
The kit includes a screw extruder, a worm gear pusher motor, a stepper motor control board and a connecting tube. To fit an FDM printer, you also need to adapt the extruder holding module, which can be downloaded here：Thingiverse. The input voltage of this module is 12v, and the input power is at least 50W. - Out of stock
The kit includes a screw extruder, a pneumatic push cylinder, a pressure regulator and a connecting tube. To fit an FDM printer, you also need to adapt the extruder holding module, which can be downloaded here：Thingiverse. 
The CERAMBOT cartridge is made of transparent PVC high-pressure plastic parts for easy inspection of the remaining amount of clay and comes with a rubber stopper. The maximum working pressure is 0.4MPa, and must not exceed 0.6MPa. This cartridge type can hold 500 cc of clay volume (at least 1 kg of printable clay).- Out of stock
In response to the problem of hard clay squeezing out, contains content: M6 screw length: 280mm*2 M6 thumb nut*2 M6 thin nut*2 304 stainless steel flange*1 
Inner diameter * outer diameter * thickness 2 * 16 * 1mm- Out of stock
The input voltage of this module is 12v, and the input power is at least 50W. - Out of stock
CERAMBOT Air storage tank with metal back cover. The CERAMBOT cartridge is made of transparent PVC high-pressure plastic parts for easy inspection of the remaining amount of clay and comes with a rubber stopper. The maximum working pressure is 0.4MPa, and must not exceed 0.6MPa. This cartridge type can hold 500 cc of clay volume (at least 1 kg of printable clay).
