What’s the difference between CERAMBOT Pro and CERAMBOT Air?
CERAMBOT Pro uses electric actuators as power, you don't need to buy other accessories.CERAMBOT Air uses air pressure as power, and you also need to buy an air compressor yourself.
CERAMBOT Pro uses electric actuators as power, you don't need to buy other accessories.CERAMBOT Air uses air pressure as power, and you also need to buy an air compressor yourself.
Printing with clay is safe. The clay you use is no different from the materials used in ceramic stores around the world.
Our warranty applies only to mechanical and electronic components and is backed by a 180-day warranty.
The best practice is a ratio of 1 to 2, and a layer height of 0.8 mm is best printed with a 1.6 mm nozzle. With our 0.6 mm nozzle, very fine and soft clay can be as low as 0.3 mm per layer. The best result is a layer height between 0.5 and 1.5 mm
The print speed depends on many variables: The type of clay you use. The hardness of the clay. The height and line width you have chosen. Printed model. For any layer height or nozzle width, the best printing speed is 15 to 25 mm per second.
All pre and post treatments follow a standard pottery process. After printing, you can still shape or process clay like any other traditionally crafted work.
We recommend using clay to print, but as long as they are smooth and free of particles or fibers, you can print almost any viscous fluid. Any clay can be used with the CERAMBOT extruder. After the clay is mixed, it is necessary to mix the printed shape with water according to the nozzle size.
Modeling software: Fusion 360, 123D, Meshmixer, SolidWorks Slice software: Cura, Slic3r Other software: Repetier host, Notepad++ Reference website: Thingiverse Grabcad Best 3d slicer software 3d printer
You also need to purchase an electric kiln for firing ceramics. If you are buying a CERAMBOT Air, you will also need at least 0.8 MPa air compressor. For better printing and printing efficiency, we recommend that you purchase a clay machine.
The printer's operating voltage is between 110 and 250V and 50 to 60Hz.