20
In response to the problem of hard clay squeezing out, contains content: M6 screw length: 280mm*2 M6 thumb nut*2 M6 thin nut*2 304 stainless steel flange*1
The latest ceramic interactive modeling software developed by CERAMBOT. After the model is generated, the STL format can be exported and then printed with CERAMBOT. It's a solution that includes software and hardware (not including laptops). More information：CERAMBOT Pottery Software
The CERAMBOT cartridge is made of transparent PVC high-pressure plastic parts for easy inspection of the remaining amount of clay and comes with a rubber stopper. The maximum working pressure is 0.4MPa, and must not exceed 0.6MPa. This cartridge type can hold 500 cc of clay volume (at least 1 kg of printable clay).
The CERAMBOT core unit comes with four aperture needles, one for each aperture. Pink: 0.6mm. Gray: 1.2mm. Light green: 1.6mm. Light blue: 2.2mm.
Inner diameter * outer diameter * thickness 2 * 16 * 1mm
CERAMBOT Air storage tank with metal back cover. The CERAMBOT cartridge is made of transparent PVC high-pressure plastic parts for easy inspection of the remaining amount of clay and comes with a rubber stopper. The maximum working pressure is 0.4MPa, and must not exceed 0.6MPa. This cartridge type can hold 500 cc of clay volume (at least 1 kg of printable clay).
The input voltage of this module is 12v, and the input power is at least 50W.
