Monthly Archives: February 2020

How to Convert a FDM 3D Printer to a Clay 3D Printer

CERAMBOT supports conversion of most FDM printers to clay printers. Your device needs to meet the following requirements: 1. You can modify the printer's firmware. If you are using marlin firmware, you need to turn off extrusion protection and add M302 code to Gcode. 2. You need to modify the resolution per second of the

By |2020-10-23T21:30:24+08:00February 25th, 2020|Design, Technology|2 Comments

Clay for 3D Printing

An overview of clay for 3D printing, including guidelines on clay preparation and clay recommendations. This article is adapted from jonathan reservations: HTTPS : // Clay for 3D printing All clays can be used for 3D printing, but some clays print better than others . What you are looking for is a less sticky clay

By |2020-02-13T12:18:17+08:00February 12th, 2020|Material|0 Comments

Caring has no border. Sharing is caring

Thanks you everyone support of CERAMBOT in the past two years! Coronaviruses are raging around the world. No one is an island, and mankind is a community of destiny. We are willing to work with you to fight the epidemic, and provide a batch of masks for all CERAMBOT users for free. If you need,

By |2020-05-16T09:27:34+08:00February 1st, 2020|Uncategorized|0 Comments
Go to Top